Civil Engineering Equipments
Abrasion Testing Machine
As per IS: 10070. For determination of the resistance to wear of small size aggregates and crushed rocks. The machine consists of a hollow cylinder mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to […]
Accelerated Curing Tank
Inner chamber made of S.S., outer body mild steel duly powder coated. Suitable to accommodate 6 cube moulds of 150mm. The unit is provided with digital temperature controller cum indicator and water circulation pump. Temperature range 5° above ambient to 100°C. Calibration certificate is provided for digital controller.
Aggregate Impact Test Apparatus
As per IS:2386 ( Part IV ). The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of hammer during test. Supplied complete with a cylindrical cup, a metal measure 75 mm inner dia x 50 mm […]
Automatic Bitumen Compactor
The automatic compactor eliminates the laborious process of manual compaction and an even degree of compaction is achieved. The drive mechanism lifts the weight of 4.5 kg and drops it through a correct height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the […]
Benklemean Beam Apparatus
The principle of this equipment is that a long beam resting on a road surface at one end and balanced at a point to give a ratio of 2:1 will magnify small deflections caused by loadings adjacent to the end of the beam in contact with the road. By using a stable platform adjacent to […]
Bitumen Extractor
As per IS:2720 (Part – XVII). The apparatus consists of :Gunmetal mould, 100mm dia x 127.3mm high x 1000ml volume, Extension collar 100mm dia. x 60mm high, Drainage base plate with a recess for a porous stone and with an outlet valve, Metallic clamping ring, Drainage cap (Top plate with a recess for a porous […]
Bitumen Mixer
It comprises of an epicyclic type stainless steel paddle which is capable imparting rotating and revolving motions at two different speeds of approximately 62 or 125 rotations per minute, coupled with approximately 140 or 285 revolutions per minute. The mixer is provided with approximately 5 kg capacity Stainless Steel bowl. Heating jacket is provided below […]
Bitumen Penetration Apparatus
The apparatus consists of a cast aluminum base with an iron stand on which moves aluminum arm. A 15cm dial is fixed on this arm and a brass rod slides through the lower portion of the arm. A needle with weight is fitted to this rod. The dial is graduated from0-400 in one tenth millimeter […]
Civil Engineering Equipment
We precision engineer, export and offer a wide variety of Civil Engineering Equipment across the markets. These equipments are checked for quality by our team of Quality controllers to ensure dimensional accuracy, superior performance, excellent finishing, durability and reliability. We extend the following equipments to our wide clientele that are widely acclaimed for its superior […]
Compaction Factor Apparatus
As per IS: 5515. Apparatus is complete with with hoppers and receiver assembly. Built on a rigid and stable frame consists of two conical hoppers, each with a hinged trap door. Trap door is operated by a quick release mechanism to allow a free fall to the released concrete mix sample. A cylindrical mould is […]
Concrete Permeability Apparatus
High pressure permeability test can be conducted on different size of specimens using different cells. Cell is provided with a top plate and funnel at the bottom having gasket seals held in position through bolts & nuts. The concrete specimens are sealed in the cell to prevent any leakage along the side walls. Each unit […]
Core Drilling Machine
he machine is used to drill cores of Bitumen Pavements. The machine is provided with hand operated rapid screw feed through lever drive with built in ball bearing. The drill spindle is floating on a tapered roller bearings. Water swivel is totally enclosed and mounted on the drill spindle. The drill drive shaft is mounted […]
Cube Moulds
We are engaged in offering a array of cube moulds, which are available in different sizes and are manufactured according to international quality standards. Further, these are cube moulds can be availed by our clients in various finishing. Also, these cube moulds are corrosion resistant, long lasting and cost effective prices. Available in sizes : 150 […]
Flow Table
As per IS: 1199 ( for Cement Concrete ). The instrument is recommended for concrete where nominal size of coarse aggregates does not exceed 38mm. It comprises of table top of 762 mm dia, fitted on a heavy duty Cast Iron frame. A cam action provides a free fall of 12.5 mm to the table. […]
Slump Test Apparatus
As per IS: 7320. It comprises of slump cone (Top dia 100mm, Bottom dia 200mm& Height 300mm) with handles made of mild steel sheet, a chrome plated graduated tamping rod 16mm dia x 600mm long , rounded at one end and a hexagonal base plate.
Thin Film Oven
Thin Film Oven (Loss on Heating Apparatus) offered by us with following specification. Inner chamber S.S., 18 x 18 x 18”, Rating 1.5 KW, 220Volts. Temp range ambient to 200°C, Digital Temperature Controller cum indicator. Front Glass Door. Unit is provided with Gear Motor and Casted Aluminum plate for thin film test.
Tile Flexure Testing Machine
As per IS:1237, 654. This is a double lever loading machine and the load is applied by flow of lead metal which automatically stops when the sample breaks. The sample is mounted between rollers 40mm or 12mm dia. Bearing rollers can be placed at centre distances of 150, 200 or 270mm. Complete with 20 Kg […]
Vee Bee Consistometer
As per IS: 1199. The instrument comprises of a slump cone with a hopper, specimen container, a transparent plastic plate attached to a graduated rod, , mounted on a vibrating table, and a tamping rod 16mm dia. x 600mm long. The vibrating table has fixed amplitude and frequency of vibration, imparted by a motor drive […]
Vicat Apparatus
Vicat Apparatus (Setting Time & Consistency of Cement) as per IS: 5513. The apparatus consists of initial needle, final needle, consistency plunger, conical vicat mould, glass plate. The apparatus is provided with dashpot arrangement for jerk free lowering of needles Available with Vicat mould 60mm top dia, 70mm bottom dia and 40mm height Vicat Mould […]