Soil Testing Equipments
Brass Frame Sieves
Brass Frame sieves 20cm Dia.
California Bearing Ratio Apparatus (Motorised)
Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorised, in place of load frame hand operated. The lead screw of the load frame has a single constant rate of travel of 1.25mm/min. Salient Features Accessories for Laboratory C.B.R. Apparatus :High sensitivity Proving Ring 3000kg. capacity with calibration chart and carrying […]
California Bearing Ratio Spares
CBR mould complete with extension collar and perforated base plate, made of gunmetal.” CBR mould complete with extension collar and perforated base plate, made of steel.” Perforated swell plate with adjustable stem and lock nut, made of gunmetal. Perforated swell plate with adjustable stem and lock nut, made of steel.Solid base plate, made of […]
California Bearing Ratio Test (Field Type)
To know C.B.R. Values in situ, it is useful in determining the load carrying capacity in the field when in-place density and water contents are such that the degree of sturation is 80 % or greater, when material is conhensionless and coarse grained, such that it is not effected by changes in water contents and […]
California Bearing Ratio Test (Hand Operated)
The equipment consists bench mounting type 5000kgf capacity load frame motorized, in place of load frame hand operated. The lead screw of the load frame had a single constant rate of travel of 1.25mm/minute. Salient Features Mould made from Gun metal/Brass, 150mm internal dia x 175mm high, with perforated base plate and extension coller 50mm […]
CBR Test Apparatus (Hand Operated)
This apparatus comprises of : A hand operated load frame 50kN capacity. A mould of 150 mm. I.D. x 175 mm. high with clamping lugs complete with extension collar and perforated base plate made of gun metal. A cutting collar to fit mould body. A penetration piston assembly of 50 mm. diameter and a bracket […]
CBR Testing Machine
The CBR test is used for determining the relative bearing ratio and expansion characteristics under known surcharge weights of base, sub-base and sub grade soils for the design of roads, pavements and runways. Tests can be conducted on all types of soils including sand, gravel and washed stone (passing through 20 mm IS Sieve). The […]
Colour Standard Chart
For the determination of organic impurities in soils and fine aggregates.
Consolidation Apparatus (Three Gang Model)
The Flexure Strength Testing are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of […]
Core Cutter
This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolly and rammer. From the weight, density and the moisture, and dry density of the soil is ready […]
Dead Weight Type Oil & Water Constant Pressure System
This device is used to maintain cell pressure constant for a long duration and the system can be used in place of conventional constant pressure system using mercury pots where certain minimum heights are required. Problems like de-airation of pump, leakage of mercury etc. is eliminated in this system . This unit is smaller in […]
Dead Weight Type Oil Water Constant Pressure System
This device is used to maintain cell pressure constant for a long duration and the system can be used in place of convensional constant pressure system using mercury posts where certain minimum heights are required. Problems like deairiation of pump, leakage of mercury etc. are eliminated in this system. This unit is smaller in volume […]
Density Bottle (GAY-LUSSAC Type)
For determining the particle density (specific gravity) of sand, fine aggregate & filler. Capacity 25ml, 50ml, 100ml, 250ml, 500ml & 1000ml.
Drop Hammer And Guide Pipe Assembly
Weight 65 Kg. Complete with two end caps to give a free fall of 75cm the drop hammer.
Earth Resistivity Meter
Capable of measuring earth voltage (V A.C.)2mA measuring current permits the testing of earth resistance without tripping earth leakage current circuit breakers in the circuit.Auto power off function. The timer operates auto power off function. The time operates the “PUSH BUTTON SWITCH” and “TIMER ON Button’ are pressed together. This will keep the test “NO” […]
Extractor Frame Hydraulic
This extractor Frame is used for taking ut soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as core cutters, Proctor moulds, C.B.R. moulds etc. Salient Features Specifications : It consists of a 5 Tone capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for […]
Extractor Frame Universal (Screw Type)
Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38mm dia sample. Specification:Comprises of a frame designed for screw jack operation, one each of the adapters […]
Field C.B.R. Test Apparatus
U-bracket and swivel head. Penetration piston, 50mm dia threaded at the upper end. Extension rods set consisting of lengths 5cm, 2 lengths 10cm, 1length 30cm, 1 length 50cm, and 1 length 100cm, used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set, has eight connectors for […]
Grain Size Analysis (Pipette Method)
This is for the determination of the sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantity the proportions by weight of the various sizes of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid flocculation. The apparatus […]
High Sensitive Tension Proving Rings
High Sensitive Tension Proving Rings.
High Speed Stirrer
This is for mechanical analysis and also other laboratory applications for stirring. Speed approximately 4000rpm under load. A dispersion cup is supported on a rest on the stand of the stirrer and has a removal baffle.For operation on 230-250 volts AC Supplied without dispersion cup or baffle.
Integral Proving Rings
The Proving rings are made of special steel carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability ensuring long life and accuracy. All proving rings are integral type viz, the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment […]
Lateral Pressure Assembly
It is designed for application of cell pressure upto 10kg/cm on a triaxial specimen in the triaxial cell. The unit is mostly used in routine tests which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. Specification:The apparatus consists of a pressure chamber which has a flanged top […]
Liquid Limit Device (Motorised)
Fitted with a motor geared down to give approximately 120 rpm. Suitable for operation on 230 V A.C. Single Phase 50 Cycles Spares: Casagrande grooving tool ASTM grooving tool height block, 1cm high
Liquid Limit Device (With Counter)
Casagrande method in mechanical form is known as liquid limit method and has been in use for soil mechanics for a number of decades. The liquid limit data of soils is useful to correlate mechanical properties of soil, such as compressibility and lower shear strength. Liquid limit is the water content at which soil passes […]
Load Frame
2000 kg capacity with 6 speeds 230 V, Single Phase, AC.
Mud Balance
Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5. It has a stainless steel bam calibrated specific gravities from 0.8 to 2.5. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights […]
Particle Density By Gas Jar Method (End-Over-End Shaker)
This method applies for soil containing upto 10% of particles retained on 37.5 mm sieve. The equipment is used to rotate two gas jars at approx. 50 R.P.M. Glass Jar is 1 litre in capacity with rubber bung.
Particle Size Sedimentation
Particle size analysis of soils: Hydrometer method This equipment is used to determine the quantitative size distribution of very fine particle in soils such as clay and silt. The complete set comprises:1. Sedimentation Cylinder, 1000 ml capacity (6 pieces) with rubber bungs. 2. Soil Hydrometer, 151H, range 0.995 to 1.038 g/ml with div. 0.0013.Glass Tank, dimensions: […]
Permeability Apparatus (Falling Head Permeability)
The apparatus is used for the laboratory determination of permeability of soil using a constant or a variable head. This test is recommended for soils with co-efficient permeability in the range of 0 10-3 to 10-7 cm/sec. The maximum particle size of the soil which can be tested in the mould is 10mm. Specification :The […]
Plastic Limit Apparatus
We are providing Plastic Limit Apparatus, which is a useful device to determine the plastic limit and clayness of soil. These are mainly catering to the requirements of diverse industries such as used in construction, mining and agriculture. Consists of: Porcelain Evaporating dish 12-15 cm dia Flat glass plate about 200 mm square Spatula flexible […]
Plastic Limit Set
Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. dia. Salient Features Specifications :The complete set consists of one each:- 1.Glass plate 20 cm x 115 […]
Plastic Limit Test
Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification : The complete set consists of one each : Glass plate 20cm x 15cm […]
Plate Bearing Test Apparatus
We are engaged in manufacturing and supplying Plate Bearing Test Apparatus, which is used for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. This test is a standard technique fro determining bearing capacity of soils and is used in agriculture, defense, education, geophysical/ seismology, irrigation and mining […]
Plummet Balance
Conventionally particle size distribution analysis is carried out using pipette and hydrometer methods. Whereas in hydrometer method it is possible to determine particle sizes in the range 75microns, the method involves computation and it is time consuming. The pipette method can be used for determining only the percentage of specific sizes less than 0.02, 0.006 […]
Pocket Penetrometer
This instrument is used to estimate approximate unconfined compressive strength and the estimation to shear strength of soil Cohesive soils can also be classified in terms of consistency using this Penetrometer. This is a handy and convenient instrument. Specification :It consists of a light weight barrel assembly with a polished and ground steel loading piston […]
Point Load Index Tester
Used for testing rock, aggregate and core samples as well as out crop specimen in their original shape. Very useful for rock classification. This is a portable instrument and is useful in the field also. Uniaxial compressive strength for rock specimen can also be predicted approximately. Salient Features Specifications : The instrument comprises of :- […]
Pore Pressure Apparatus
Same as above, but fitted with pressure gauge 0-20 kg / cm2 x 0.2 kg / cm².Spares: Polythene tube 3 mm bore x 5 mm OD.
Pore Pressure Apparatus
This apparatus is used for measuring pore water pressure and pore air pressure in soils. This is as per the principals outlined in the book “Measurement of soil properties in triaxial tests” by AW Bishop and D.J.Henkel. This is used as a naccessory for triaxial test apparatus. Salient Features Specifications : The apparatus consists of […]
Pore Pressure Apparatus 10kg/cm2
Specification:The apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg/cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia. Manometer: Glass u-tube manometer for measuring low positive pore pressures negative pore measures and checking zero error of pressure gauge. It is provided with a […]
Post Hole Auger
Post Hole Auger are used to collect disturbed soil samples at reasonal depths for laboratory tests. Augers are available in two types and each in different sizes. Blade type (posthole type) and helical type (screw type). Each auger outfit consists one each of auger head, one meter long rod, tee piece and handle. Depth of […]
Posthole Type
(a) 75mm, (b) 100 mm & (c) 150 mm dia.
Proctor Needles (Spring Type)
The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. Long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. The small penetration stem is also graduation in 12.5mm division […]
Pycnometers Bottles
These bottles are used for relative density measurements, made from borosilicate glass with capillary bored stopper. Capacities available (a) 50 cc and (b) 100 cc.
Sampling Augers
Augers are used to collect distributed soil samples at reasonal depths for laboratory tests. Augers are available in two type and each in different sizes. Blade type (post hole type) and Helical type (Screw type). Each auger outfit consists one each of Auger head, one meter long rod, Tee piece and hangle. Depths of excavating […]
Sampling Outfit
(a) For preparing 38 mm dia Soil Specimen Salient Features Specifications : The outfit comprises: Sample Extractor, Screw type with a wire sample Timer. Split Mould, 38 mm dia x 76 mm long. Split mould, 38 mm dia x 88 mm long (in two parts) can be fitted to the screw type extractor enabling solt […]
Sampling Tubes
For collecting undistributed samples of 38 mm dia for Triaxial Shear strength and Unconfined Compressive strength either straight from the field or from a sample of larger diameter. The wall thickness is maintained approximately 1.6 mm with an area ratio approximately 17 per cent. Both relieved and undrelieved sampling tubes are available. In the relieved […]
Sand Equivalent Apparatus
We are offering Sand Equivalent Apparatus, which are equipped with two separate electronic timers to increase accuracy and ease of operation compared to a spring-type timer. It is recommended for samples in the laboratory. These are available bench mounted and designed to meet the requirements of the European & ASTM test methods. Sand equivalent Apparatus Consist […]