Additional Information:

• Item Code: LBS-ACC-159

The post Air Conditioner Chamber appeared first on Quantum Scientific.

Features:

• Heating: Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity
• Cooling: An energy efficient cooling unit is installed in our environmental chambers to enable bio chemical demand, cyclic and growth studies at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines
• Humidity Range: 10% to 95%
• Humidity Sensitivity: Humidity is controlled by mean of an electronic humidity controller cum indicator with an accuracy of + 5%
• Temperature Control:The temperature inside our environmental chambers is controlled through programmable micro-processor based temperature controller cum indicator
• Temperature Range: Temperature range of our standard Chamber is 5o c to 90o c. However we have the capacity to modify the same from -100 to +3000C to suit the individual specialized requirements of our customers
• Temperature Sensitivity: Temperature inside our environmental chambers are controlled with a sensitivity of + 0.5o c or better
• Illumination: Our environmental chambers are provided with door operated illumination system comprising of fluorescent lights, beside two panels of diffused fluorescent light panel located at the either side of the chamber to enable the user to conduct the photo periodic tests and experiments
• Illumination Control: The illumination is controlled through solid state cyclic timer to control the photoperiodic cycle of the chamber
• Front Panel: Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers and voltmeters
• Insulation: The gap of 75 mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses
• Air circulation: Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber
• Shelves: The unit is supplied with three shelves of stainless steel sheet
• Voltage: To work on 220/230V A.C. supply

Specifications:

The post Environmental Chamber appeared first on Quantum Scientific.

Features:

• Fumigation Chamber is ideal for sterilization and deacidification of documents and books and allied materials carrying out documentary heritage.
• Double walled unit has outer made of cold rolled steel sheet duly powder coated
• Inner chamber and perforated shelves are made up of stainless steel
• Meant for fumigating specimens with insecticide for preservation
• Specimens may be placed in the chamber, insecticide sprayed and the lockable airtight door be closed
• Air circulating fan is provided on one side which helps in rotating the insecticide fumes throughout the chamber properly
• The perforated sheet is used when small specimens are to be fumigated. First small specimens may be placed in chamber, then the perforated sheet placed in the chamber and the specimens kept on it followed by the process of spraying the insecticide and switching on the fan.
• Available with and without temperature control arrangement
• Temperature controlled models are fitted with Microprocessor Based Digital Temperature Cum Indicator
• To work on 220/230V AC. Supply

Specifications:

Applications:

• Fumigation Chambers are ideal for sterilization and deacidification of documents and books and allied materials carrying out documentary heritage
• Double walled unit has outer made of cold rolled steel sheet duly powder coated and Inner chamber and perforated shelves are made up of stainless steel
• Meant for fumigating specimens with insecticide for preservation

The post Fumigation Chamber appeared first on Quantum Scientific.

Features:

• Reliable
• Precise Control Of Environmental Parameters
• Micro-processor based Controllers
• Corrosion Resistant interior and exteriors
• Energy Efficient
• CFC free cooling
• Sturdy Construction
• Low Maintenance
• Light Weight
• Humidity: Humidity generation provision is incorporated in our chambers The humidity is generated by means of aerosol humidity generator with efficient humidity controller cum indicator
• Humidity Range: From 40 to 95% rh(can be customized as per the user’s Requirements)
• Humidity Sensitivity: Humidity is controlled by mean of an electronic humidity controller cum indicator with an accuracy of ±3%
• Temperature Range: Temperature range is 20 to 90ºc as per user requirement
• Temperature Sensitivity: Temperature inside our Humidity chambers are controlled with a sensitivity of + 0.5ºc or better

Specifications:

The post Humidity Chamber appeared first on Quantum Scientific.

• Chamber is illuminated using fluorescent tube light to produce visible light (measure in lux). A UV light of wavelength 365nm (measured in watt/sq. meter) is fitted on topside of chamber.

Control system:

• Temperature controller with Micro Processor Based Digital Temp. Controller.

Humidity system:

• Humidity is by steam injection and is directly displayed in % RH measured by capacitance type Electronic Humidity Sensor.

Cooling system:

• CFC free, the cooling system consists of hermetically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. Refrigerant 134A Door switch to switch off the UV light when door is opened.

Safety:

• A safety thermostat to switch off tube lights if temperature overshoots. Door switch to switch off the UV light when door is opened. The unit works on 230 volts AC AND 50 Hz mains supply.

Specifications:

The post Photo Stability Test Chamber appeared first on Quantum Scientific.

Features:

• Oriented design of shelves makes you adjust each space of shelves without difficulty
• With a solid see through double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature
• Front double walled door is provided with lock and key arrangement
• Caster wheel mounted for easy portability
• Excellent quality magnetic gum packing door gasket for external door
• Door operated illumination lamp is fitted inside the chamber for easy visibility
• Foamed-in-Place PUF insulation ensures thermal stability and reduces electrical energy consumption
• Forced air circulation at triple walled back by durable coaxial blower, maintains optimum temperature uniformity and homogeneity
• Exterior illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
• Finned tube evaporator facilitates uniform and faster cooling effects
• Safety Thermostat to prevent overheating
• Fitted with Electronic Digital Voltmeter
• Works on 220/230 Volts AC (50/60 Hz frequency)

Specifications:

The post Plant Growth Chamber appeared first on Quantum Scientific.

Features:

• The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts:
• Digital indicators Cum Controller: Its function is to indicate and maintain the temperatures. For solution tank itsFunction is to indicate and maintain the temperatures and for test cabinet, its function is to indicate the temperature only
• Digital Timer 999 Hours Cutt-Off Facility: It shows the working time for the apparatus & the time consume in the process in digitally system. Time limit is for 999 hours
• Humidity Indicators With Senser: Humidity can be checked in Digitally way. Its function is to maintained during the Salt Spray with saturation of Salt Solution.
• Air Regulator: The Air Regulator will maintain a constant pressure of Air.
• Air Filter: The compressed air will be passed through a Filter Arrangement to remove all traces of oil and solid matters before sent to the saturation tower.
• Mist Dispersion Automizer: Atomizer made of S.S will be equipped in the Chamber having property of nonchoking.It produces a mist of atomized solution, which is distributed uniformly through out the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets.
• Fog Collection Unit: Two Mist Cylinders are provided for measurement mist quantity. Each cylinder is with separate funnel for collection of mist.
• Drainage System: The collected mist on the testing space will be recycled through drainage system.
• Heating System: The Temperature within the Chamber maintained by Heater with Digital indicator cum controller System.

Optional Accessories:

• Blowing cabinet for maintaining temp. of cabinet up to 25 degrees Rs. 8500.00
• Extra Mist dispersion atomizer Rs. 5500.00

Specifications:

Products Details:

• Ph Paper pack: 1 nos
• S. S. Hanger: 20 pcs
• Jet Cleaning Pins: 2 nos
• Sample Thread: 2 mtr

The post Salt Spray Chamber appeared first on Quantum Scientific.

• 10 Degree C to 60 degree C (Accuracy: 0.2o C)

Humidity Range:

• 40% to 95% RH (Accuracy: 1%)

Accurate Micro processor Based Humidity Control System:

• The LABSOL” Stability Chamber uses a microprocessor based; electronic humidity sensor detector is an exact logarithmic function of the humidity concentration in the environment of the chamber between source and detector.

Illumination:

• Our photo stability chamber conforms to the illumination requirement as per the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use.

Insulation:

• The gap of 75 mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses.

Mineral Glass Wool Insulation:

• Glass mineral wool is one of the most environmentally friendly, stable and sustainable insulants available. Glass wool is incombustible by nature. Euro class classification is A.

Air circulation:

• Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber

Features of Coaxial Circulation Fan:

• Vacuum impregnated stator winding with dr. back varnish under red baktol
• Non-hygroscopic
• Best IR value
• Bright bar (EN – 8 class) shaft
• Bush bearing of branded companies
• Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator
• Pressure die-casted-rotor manufactured with zero error
• Boats of high accuracy

Specifications:

The post Stability Test Chamber appeared first on Quantum Scientific.

• Heating: Indirect heating system is provided in our units, comprising of Stainless steel sheathed air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity..The heaters will be placed in the conditioning plenum such that there is no direct radiation from the heaters onto the test specimen. Heater outputs are controlled through a SSR for superior stability and control in temperature
• Cooling: We use ISI marked high end High Capacity ultra-low temperature Semi – Hermetic. The compressors are mounted on anti vibration pads for better physical stability and Eco friendly Non-CFC refrigerant R-404a is used. An air-cooled condenser specially designed for tropical climates is driven by a co-axial fan. The heat exchanger coils are Inner grooved copper tubes and are finned for maximum heat transfer. For special purposes hot gas bypass systems are used for protection against No-Load condition
• Temperature Range: Temperature range of our standard Chamber is 0o c to 90o c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers.
• Temperature Sensitivity: Temperature inside our walk-in incubator are controlled with a sensitivity of + 1 o c or better.
• Illumination: Our units are provided with door operated illumination system comprising of fluorescent lights
• Humidity Range: 20% to 80% (Humidity Applicable as per the Temperature Humidity Graph Attached)

Humidification:

• Humidity inside the chamber us provided by steam generated through heating water with the help of immersion type heater. A water reservoir is provided in the machine with heaters and controls for this purpose, to achieve 90 to 96% + 3% RH (non adjustable ) If desired the same can be done through aerosol humidifier.

Front Panel:

• Front panel of our units comprises of on/off switches , HMI Screen ,heating, cooling and mains indicator lamps & temperature controllers

Safety Features:

• Chambers are provided with safety cut offs and alarms at centrally located places including one at the gate
• Special door lock is provided which can be opened from inside even if locked from outside
• An emergency bell switch is also provided inside the chamber
• Dedicated Safety system to shut off the humidity system and chamber shut down in case of overshoot or undershoot of temperature or humidity with audio visual alarm.
• Thermostatic safety system is provided as an additional safety feature
• Low water level cut off for humidity system
• Door open alarm
• Works on 220V AC Single phase 50 Hz

Additional Information:

• Item Code: LBS-WEC-160

The post Walk In Environmental Chamber appeared first on Quantum Scientific.

Features:

• Pre-fabricated modular panel type construction with PUF insulation to be assembled on site with floor panels having extra reinforcement to sustain the movement and sample load inside the chamber. It is provided with effective air circulation system, refrigeration system, humidity system, multi pane vacuum sealed observation glass window, chamber illumination and stainless steel racks and perforated trays
• Microprocessor-based PID controller with auto tuning for accurate control of temperature and humidity conditions and printer interface facility to store data and to print it directly on a printer with variable print time interval
• A Single point temperature and humidity scanner with printer interface
• Door Access Security System with smart cards / bio-metrics and software to authorize and to monitor door accessibility
• Heating: Indirect heating system is provided in our units, comprising of Stainless steel sheathed air heaters of suitable wattage.. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity..The heaters will be placed in the conditioning plenum such that there is no direct radiation from the heaters onto the test specimen. Heater outputs are controlled through a SSR for superior stability and control in temperature
• Cooling: We use ISI marked high end High Capacity ultra-low temperature Semi – Hermetic. The compressors are mounted on anti vibration pads for better physical stability and Eco friendly Non-CFC refrigerant R-404a is used. An air-cooled condenser specially designed for tropical climates is driven by a co-axial fan. The heat exchanger coils are Inner grooved copper tubes and are finned for maximum heat transfer. For special purposes hot gas bypass systems are used for protection against No-Load condition
• Temperature Range: Temperature range of our standard Chamber is 0o c to 90o c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers
• Temperature Sensitivity: Temperature inside our walk-in incubator are controlled with a sensitivity of 1 o c or better
• Illumination: Our units are provided with door operated illumination system comprising of fluorescent lights
• Humidity Range: 20% to 80% (Humidity Applicable as per the Temperature Humidity Graph Attached)
• Humidification
• Humidity inside the chamber us provided by steam generated through heating water with the help of immersion type heater. A water reservoir is provided in the machine with heaters and controls for this purpose, to achieve 90 to 96% 3% RH (non adjustable ) If desired the same can be done through aerosol humidifier

Safety Features:

• Chambers are provided with safety cut offs and alarms at centrally located places including one at the gate
• Special door lock is provided which can be opened from inside even if locked from outside
• An emergency bell switch is also provided inside the chamber
• Dedicated Safety system to shut off the humidity system and chamber shut down in case of overshoot or undershoot of temperature or humidity with audio visual alarm.
• Thermostatic safety system is provided as an additional safety feature.
• Low water level cut off for humidity system
• Door open alarm
• Works on 220V AC Single phase 50Hz

The post Walk In Test Chamber appeared first on Quantum Scientific.