Accelerated Curing Tank
Inner chamber made of S.S., outer body mild steel duly powder coated. Suitable to accommodate 6 cube moulds of 150mm. The unit is provided with digital temperature controller cum indicator and water circulation pump. Temperature range 5° above ambient to 100°C. Calibration certificate is provided for digital controller.
Be the first to review “Accelerated Curing Tank”
Related Products
Benklemean Beam Apparatus
The principle of this equipment is that a long beam resting on a road surface at one end and balanced at a point to give a ratio of 2:1 will magnify small deflections caused by loadings adjacent to the end of the beam in contact with the road. By using a stable platform adjacent to […]
Cube Moulds
We are engaged in offering a array of cube moulds, which are available in different sizes and are manufactured according to international quality standards. Further, these are cube moulds can be availed by our clients in various finishing. Also, these cube moulds are corrosion resistant, long lasting and cost effective prices. Available in sizes : 150 […]
Slump Test Apparatus
As per IS: 7320. It comprises of slump cone (Top dia 100mm, Bottom dia 200mm& Height 300mm) with handles made of mild steel sheet, a chrome plated graduated tamping rod 16mm dia x 600mm long , rounded at one end and a hexagonal base plate.
High Frequency Mortar Cube Vibrating Machine
As per IS: 4031. This apparatus is suitable for making cubes of 70.6mm, for mortar strength evaluation. The mould is mounted on a vibrating platform with a frequency of 12000 ± 400 vibrations per minute To the platform are attached four matched springs. The whole assembly is operated by a revolving shaft with an eccentric […]
Vibrating Table
For compaction of cement concrete while casting cubes. Table top 500 x 500mm with elevated edges. Maximum Load capacity 140 kg. The variable pitch pulley arrangement permits the frequency to be varied between 2600 to 3600 RPM. The machine has fixed amplitude. The unit is provided with starter switch. Other sizes available – Table top […]
Bitumen Extractor
As per IS:2720 (Part – XVII). The apparatus consists of :Gunmetal mould, 100mm dia x 127.3mm high x 1000ml volume, Extension collar 100mm dia. x 60mm high, Drainage base plate with a recess for a porous stone and with an outlet valve, Metallic clamping ring, Drainage cap (Top plate with a recess for a porous […]
Reviews