Cylindrical Mould
Specification : The moulds is split vertically into two parts. The mean internal diameter in within +/-0.2mm and height is within +/-1mm. The ends are machined to +/-0.05. The base plate and top plate are machined flat to +/-0.03mm.
RLE-504: Mould cylinder, cast iron, 15cm dia x 30cm height.
RLE-505 : Mould cylinder, cast iron, 16cm dia x 32cm height.
RLE-506 : Mould cylinder, cast iron, 10cm dia x 20cm height.
RLE-507 : Mould cylinder, cast iron, 30cm dia x 60cm height.
Be the first to review “Cylindrical Mould” Cancel reply
Related Products
Tamping Bar
Tamping Bar This is used for compacting concrete into cube moulds. This rod is made of steel it is 16mm dia., 600mm in length and rounded at both ends.
LE Chatelier Water Bath
LE Chatelier Water Bath Double walled inner chamber in stainless steel outer chamber in mild steel temperature range Ambient to 100°C controlled by capillary thermostat. Accuracy ± 1°C operated on 230V A.C. Single Phase. These baths are suitable for washing Marshall specimen. Lid is made up of stainless steel with a hole for glass thermometer […]
Shrinkage Bar Mould (One Gang) RLE-102
Shrinkage Bar Mould (One Gang) RLE-102 The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Specification : The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has accurately machined faces. The parts of […]
Flow Table
Flow Table ( Hand operated ) RLE-521 AS PER IS CODE – 6932 ( PART VIII) ASTM C 230,BS 4551:1 Specification: The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by […]
Vicat Apparatus
Vicat Apparatus (Setting Time & Consistency of Cement) as per IS: 5513. The apparatus consists of initial needle, final needle, consistency plunger, conical vicat mould, glass plate. The apparatus is provided with dashpot arrangement for jerk free lowering of needles Available with Vicat mould 60mm top dia, 70mm bottom dia and 40mm height Vicat Mould […]
Le Chatelier Moulds
As per IS: 5514. Used for soundness test of cement. The apparatus consists of a small split cylinder forming a mould of 30mm internal dia. and 30mm high. On either side of the split cylinder, two parallel indicating arms with pointed ends are fixed. The mould is supplied with two glass plates and lead weight. […]
Reviews