Gauging Trowel
Gauging Trowel
Weight approximately 210 gms.. Best quality with hard wood handle blade length 200mm.
Be the first to review “Gauging Trowel”
Related Products
Shrinkage Bar Mould (One Gang) RLE-102
Shrinkage Bar Mould (One Gang) RLE-102 The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Specification : The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has accurately machined faces. The parts of […]
LE Chatelier Water Bath
LE Chatelier Water Bath Double walled inner chamber in stainless steel outer chamber in mild steel temperature range Ambient to 100°C controlled by capillary thermostat. Accuracy ± 1°C operated on 230V A.C. Single Phase. These baths are suitable for washing Marshall specimen. Lid is made up of stainless steel with a hole for glass thermometer […]
Le Chatelier Moulds
As per IS: 5514. Used for soundness test of cement. The apparatus consists of a small split cylinder forming a mould of 30mm internal dia. and 30mm high. On either side of the split cylinder, two parallel indicating arms with pointed ends are fixed. The mould is supplied with two glass plates and lead weight. […]
LE Chatelier Flask
LE Chatelier Flask Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in that fits a ground glass stopper. The neck […]
Flow Table
Flow Table ( Hand operated ) RLE-521 AS PER IS CODE – 6932 ( PART VIII) ASTM C 230,BS 4551:1 Specification: The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by […]
Vibrating Machine
Vibrating Machine Specification : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported […]
Reviews