Shrinkage Bar Mould (One Gang) RLE-102
Shrinkage Bar Mould (One Gang) RLE-102
The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity.
Specification : The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.
Be the first to review “Shrinkage Bar Mould (One Gang) RLE-102” Cancel reply
Related Products
LE Chatelier Flask
LE Chatelier Flask Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in that fits a ground glass stopper. The neck […]
Shrinkage Bar Mould (Two Gang) : RLE-103
Same as RLE-102 but with Two compartments assembled on angle base plate
Blaine’s Air Permeability Apparatus
The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type are permeability. Specification: The apparatus consists one each of permeability cell 12.5mm I.D. manometer ‘U’ type mounted on stand with a built […]
Prism Mould Three Gang (40.1x40x160mm)
Prism Mould Three gang (40.1x40x160mm) It is supplied complete with base. All parts are marked with thei dentification number for correct assembly. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness & roughness.
LE Chatelier Water Bath
LE Chatelier Water Bath Double walled inner chamber in stainless steel outer chamber in mild steel temperature range Ambient to 100°C controlled by capillary thermostat. Accuracy ± 1°C operated on 230V A.C. Single Phase. These baths are suitable for washing Marshall specimen. Lid is made up of stainless steel with a hole for glass thermometer […]
Tamping Bar
Tamping Bar This is used for compacting concrete into cube moulds. This rod is made of steel it is 16mm dia., 600mm in length and rounded at both ends.
Reviews