Vibrating Machine
Specification : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft within a distance of 25mm below it. The electric motor drives the shaft of the frame and thus imparts required vibration to the moulds. The frequency of vibration is 12000 +/- 400 Vibration Per Minute. Supplied complete with on 7.06 cm Cube Mould with loose base plate, a time switch 0-5mins x 1mm.
Spares : Set of springs, belt and belt guard.
Be the first to review “Vibrating Machine” Cancel reply
Related Products
Compaction Factor Apparatus
Backed by our rich industrial experience in this domain, we are devotedly engaged in offering a wide assortment of Compaction Factor Apparatus. The offered product is manufactured with the help of quality approved raw material and cutting-edge technology under the supervision of skilled professionals. Prior dispatch, the entire range is rigorously tested on various parameters of […]
Vee Bee Consistometer
As per IS: 1199. The instrument comprises of a slump cone with a hopper, specimen container, a transparent plastic plate attached to a graduated rod, , mounted on a vibrating table, and a tamping rod 16mm dia. x 600mm long. The vibrating table has fixed amplitude and frequency of vibration, imparted by a motor drive […]
Le Chatelier Moulds
As per IS: 5514. Used for soundness test of cement. The apparatus consists of a small split cylinder forming a mould of 30mm internal dia. and 30mm high. On either side of the split cylinder, two parallel indicating arms with pointed ends are fixed. The mould is supplied with two glass plates and lead weight. […]
Tamping Rod
Tamping Rod This is used for compacting concrete into cube moulds. This rod is made of steel it is 16mm dia., 600mm in length and rounded at both ends.
Vicat Apparatus
Vicat Apparatus (Setting Time & Consistency of Cement) as per IS: 5513. The apparatus consists of initial needle, final needle, consistency plunger, conical vicat mould, glass plate. The apparatus is provided with dashpot arrangement for jerk free lowering of needles Available with Vicat mould 60mm top dia, 70mm bottom dia and 40mm height Vicat Mould […]
Gauging Trowel
Gauging Trowel Weight approximately 210 gms.. Best quality with hard wood handle blade length 200mm.
Reviews